A | |
| abi_align [Llvm_target.DataLayout] |
Computes the ABI alignment of a type in bytes for a target.
|
| abi_size [Llvm_target.DataLayout] |
Computes the ABI size of a type in bytes for a target.
|
| add_aggressive_dce [Llvm_scalar_opts] |
See the
llvm::createAggressiveDCEPass function.
|
| add_alias [Llvm] | add_alias m t a n inserts an alias in the module m with the type t and
the aliasee a with the name n.
|
| add_alignment_from_assumptions [Llvm_scalar_opts] |
See the
llvm::createAlignmentFromAssumptionsPass function.
|
| add_always_inliner [Llvm_ipo] |
See the
llvm::createAlwaysInlinerPass function.
|
| add_analysis_passes [Llvm_target.TargetMachine] |
Adds the target-specific analysis passes to the pass manager.
|
| add_argument_promotion [Llvm_ipo] |
See the
llvm::createAddArgumentPromotionPass function.
|
| add_basic_alias_analysis [Llvm_scalar_opts] |
See the
llvm::createBasicAliasAnalysisPass function.
|
| add_bb_vectorize [Llvm_vectorize] |
See the
llvm::createBBVectorizePass function.
|
| add_case [Llvm] | add_case sw onval bb causes switch instruction sw to branch to bb
when its input matches the constant onval.
|
| add_cfg_simplification [Llvm_scalar_opts] |
See the
llvm::createCFGSimplificationPass function.
|
| add_clause [Llvm] | add_clause lp clause adds the clause to the landingpadinstruction.
|
| add_constant_merge [Llvm_ipo] |
See the
llvm::createConstantMergePass function.
|
| add_constant_propagation [Llvm_scalar_opts] |
See the
llvm::createConstantPropagationPass function.
|
| add_correlated_value_propagation [Llvm_scalar_opts] |
See the
llvm::createCorrelatedValuePropagationPass function.
|
| add_dead_arg_elimination [Llvm_ipo] |
See the
llvm::createDeadArgEliminationPass function.
|
| add_dead_store_elimination [Llvm_scalar_opts] |
See
llvm::createDeadStoreEliminationPass function.
|
| add_destination [Llvm] | add_destination br bb adds the basic block bb as a possible branch
location for the indirectbr instruction br.
|
| add_early_cse [Llvm_scalar_opts] |
See the
llvm::createEarlyCSE function.
|
| add_function_attr [Llvm] | add_function_attr f a adds attribute a to the return type of function
f.
|
| add_function_attrs [Llvm_ipo] |
See the
llvm::createFunctionAttrsPass function.
|
| add_function_inlining [Llvm_ipo] |
See the
llvm::createFunctionInliningPass function.
|
| add_global_dce [Llvm_ipo] |
See the
llvm::createGlobalDCEPass function.
|
| add_global_mapping [Llvm_executionengine] | add_global_mapping gv ptr ee tells the execution engine ee that
the global gv is at the specified location ptr, which must outlive
gv and ee.
|
| add_global_optimizer [Llvm_ipo] |
See the
llvm::createGlobalOptimizerPass function.
|
| add_gvn [Llvm_scalar_opts] |
See the
llvm::createGVNPass function.
|
| add_incoming [Llvm] | add_incoming (v, bb) pn adds the value v to the phi node pn for use
with branches from bb.
|
| add_ind_var_simplification [Llvm_scalar_opts] |
See the
llvm::createIndVarSimplifyPass function.
|
| add_instruction_combination [Llvm_scalar_opts] |
See the
llvm::createInstructionCombiningPass function.
|
| add_instruction_param_attr [Llvm] | add_instruction_param_attr ci i a adds attribute a to the ith
parameter of the call or invoke instruction ci.
|
| add_internalize [Llvm_ipo] |
See the
llvm::createInternalizePass function.
|
| add_ipc_propagation [Llvm_ipo] |
See the
llvm::createIPConstantPropagationPass function.
|
| add_ipsccp [Llvm_ipo] |
See the
llvm::createIPSCCPPass function.
|
| add_jump_threading [Llvm_scalar_opts] |
See the
llvm::createJumpThreadingPass function.
|
| add_lib_call_simplification [Llvm_scalar_opts] |
See the
llvm::createSimplifyLibCallsPass function.
|
| add_licm [Llvm_scalar_opts] |
See the
llvm::createLICMPass function.
|
| add_loop_deletion [Llvm_scalar_opts] |
See the
llvm::createLoopDeletionPass function.
|
| add_loop_idiom [Llvm_scalar_opts] |
See the
llvm::createLoopIdiomPass function.
|
| add_loop_reroll [Llvm_scalar_opts] |
See the
llvm::createLoopRerollPass function.
|
| add_loop_rotation [Llvm_scalar_opts] |
See the
llvm::createLoopRotatePass function.
|
| add_loop_unroll [Llvm_scalar_opts] |
See the
llvm::createLoopUnrollPass function.
|
| add_loop_unswitch [Llvm_scalar_opts] |
See the
llvm::createLoopUnswitchPass function.
|
| add_loop_vectorize [Llvm_vectorize] |
See the
llvm::createLoopVectorizePass function.
|
| add_lower_expect_intrinsic [Llvm_scalar_opts] |
See the
llvm::createLowerExpectIntrinsicPass function.
|
| add_lower_switch [Llvm_scalar_opts] |
See the
llvm::createLowerSwitchPass function.
|
| add_memcpy_opt [Llvm_scalar_opts] |
See the
llvm::createMemCpyOptPass function.
|
| add_memory_to_register_demotion [Llvm_scalar_opts] |
See the
llvm::createDemoteMemoryToRegisterPass function.
|
| add_memory_to_register_promotion [Llvm_scalar_opts] |
See the
llvm::createPromoteMemoryToRegisterPass function.
|
| add_merged_load_store_motion [Llvm_scalar_opts] |
See
llvm::createMergedLoadStoreMotionPass function.
|
| add_module [Llvm_executionengine] | add_module m ee adds the module m to the execution engine ee.
|
| add_named_metadata_operand [Llvm] | add_named_metadata_operand m name v adds v as the last operand of
metadata named name in module m.
|
| add_param_attr [Llvm] | add_param p a adds attribute a to parameter p.
|
| add_partially_inline_lib_calls [Llvm_scalar_opts] |
See the
llvm::createPartiallyInlineLibCallsPass function.
|
| add_prune_eh [Llvm_ipo] |
See the
llvm::createPruneEHPass function.
|
| add_reassociation [Llvm_scalar_opts] |
See the
llvm::createReassociatePass function.
|
| add_scalar_repl_aggregation [Llvm_scalar_opts] |
See the
llvm::createScalarReplAggregatesPass function.
|
| add_scalar_repl_aggregation_ssa [Llvm_scalar_opts] |
See the
llvm::createScalarReplAggregatesPassSSA function.
|
| add_scalar_repl_aggregation_with_threshold [Llvm_scalar_opts] |
See the
llvm::createScalarReplAggregatesWithThreshold function.
|
| add_scalarizer [Llvm_scalar_opts] |
See
llvm::createScalarizerPass function.
|
| add_sccp [Llvm_scalar_opts] |
See the
llvm::createSCCPPass function.
|
| add_scoped_no_alias_alias_analysis [Llvm_scalar_opts] |
See the
llvm::createScopedNoAliasAAPass function.
|
| add_slp_vectorize [Llvm_vectorize] |
See the
llvm::createSLPVectorizerPass function.
|
| add_strip_dead_prototypes [Llvm_ipo] |
See the
llvm::createStripDeadPrototypesPass function.
|
| add_strip_symbols [Llvm_ipo] |
See the
llvm::createStripSymbolsPass function.
|
| add_tail_call_elimination [Llvm_scalar_opts] |
See the
llvm::createTailCallEliminationPass function.
|
| add_target_dependent_function_attr [Llvm] | add_target_dependent_function_attr f a adds target-dependent attribute
a to function f.
|
| add_to_pass_manager [Llvm_target.DataLayout] | add_to_pass_manager pm dl adds the data layout dl to
the pass manager pm.
|
| add_type_based_alias_analysis [Llvm_scalar_opts] |
See the
llvm::createTypeBasedAliasAnalysisPass function.
|
| add_verifier [Llvm_scalar_opts] |
See the
llvm::createVerifierPass function.
|
| address_space [Llvm] | address_space pty returns the address space qualifier of the pointer type
pty.
|
| align_of [Llvm] | align_of ty returns the alignof constant for the type ty.
|
| alignment [Llvm] | alignment g returns the required alignment of the global value g.
|
| all [Llvm_target.Target] | all () returns a list of known targets.
|
| append_block [Llvm] | append_block c name f creates a new basic block named name at the end of
function f in the context c.
|
| array_length [Llvm] | element_type aty returns the element count of the array type aty.
|
| array_type [Llvm] | array_type ty n returns the array type containing n elements of type
ty.
|
| as_string [Llvm_target.DataLayout] | as_string dl is the string representation of the data layout dl.
|
| as_string [Llvm.MemoryBuffer] | as_string mb is the string containing the contents of memory buffer mb.
|
| assert_valid_function [Llvm_analysis] | verify_function f returns if the function f is valid, but prints a
validation report to stderr and aborts the program if it is invalid.
|
| assert_valid_module [Llvm_analysis] | verify_module m returns if the module m is valid, but prints a
validation report to stderr and aborts the program if it is invalid.
|
B | |
| basic_blocks [Llvm] | basic_blocks fn returns the basic blocks of the function f.
|
| block_address [Llvm] | block_address f bb returns the address of the basic block bb in the
function f.
|
| block_begin [Llvm] | block_begin f returns the first position in the basic block list of the
function f.
|
| block_end [Llvm] | block_end f returns the last position in the basic block list of
the function f.
|
| block_of_value [Llvm] | block_of_value v losslessly casts v to an llbasicblock.
|
| block_parent [Llvm] | block_parent bb returns the parent function that owns the basic block.
|
| block_pred [Llvm] | block_pred bb returns the basic block list position preceding After bb.
|
| block_succ [Llvm] | block_succ bb returns the basic block list position succeeding
Before bb.
|
| block_terminator [Llvm] | block_terminator bb returns the terminator of the basic block bb.
|
| build_add [Llvm] | build_add x y name b creates a
%name = add %x, %y
instruction at the position specified by the instruction builder b.
|
| build_aggregate_ret [Llvm] | build_aggregate_ret vs b creates a
ret {...} { %v1, %v2, ... }
instruction at the position specified by the instruction builder b.
|
| build_alloca [Llvm] | build_alloca ty name b creates a
%name = alloca %ty
instruction at the position specified by the instruction builder b.
|
| build_and [Llvm] | build_and x y name b creates a
%name = and %x, %y
instruction at the position specified by the instruction builder b.
|
| build_array_alloca [Llvm] | build_array_alloca ty n name b creates a
%name = alloca %ty, %n
instruction at the position specified by the instruction builder b.
|
| build_array_malloc [Llvm] | build_array_malloc ty val name b creates an array malloc
instruction at the position specified by the instruction builder b.
|
| build_ashr [Llvm] | build_ashr x y name b creates a
%name = ashr %x, %y
instruction at the position specified by the instruction builder b.
|
| build_atomicrmw [Llvm] | build_atomicrmw op ptr val o st b creates an atomicrmw instruction with
operation op performed on pointer ptr and value val with ordering o
and singlethread flag set to st at the position specified by
the instruction builder b.
|
| build_bitcast [Llvm] | build_bitcast v ty name b creates a
%name = bitcast %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_br [Llvm] | build_br bb b creates a
br %bb
instruction at the position specified by the instruction builder b.
|
| build_call [Llvm] | build_call fn args name b creates a
%name = call %fn(args...)
instruction at the position specified by the instruction builder b.
|
| build_cond_br [Llvm] | build_cond_br cond tbb fbb b creates a
br %cond, %tbb, %fbb
instruction at the position specified by the instruction builder b.
|
| build_empty_phi [Llvm] | build_empty_phi ty name b creates a
%name = phi %ty instruction at the position specified by
the instruction builder b.
|
| build_exact_sdiv [Llvm] | build_exact_sdiv x y name b creates a
%name = exact sdiv %x, %y
instruction at the position specified by the instruction builder b.
|
| build_extractelement [Llvm] | build_extractelement vec i name b creates a
%name = extractelement %vec, %i
instruction at the position specified by the instruction builder b.
|
| build_extractvalue [Llvm] | build_extractvalue agg idx name b creates a
%name = extractvalue %agg, %idx
instruction at the position specified by the instruction builder b.
|
| build_fadd [Llvm] | build_fadd x y name b creates a
%name = fadd %x, %y
instruction at the position specified by the instruction builder b.
|
| build_fcmp [Llvm] | build_fcmp pred x y name b creates a
%name = fcmp %pred %x, %y
instruction at the position specified by the instruction builder b.
|
| build_fdiv [Llvm] | build_fdiv x y name b creates a
%name = fdiv %x, %y
instruction at the position specified by the instruction builder b.
|
| build_fmul [Llvm] | build_fmul x y name b creates a
%name = fmul %x, %y
instruction at the position specified by the instruction builder b.
|
| build_fneg [Llvm] | build_fneg x name b creates a
%name = fsub 0, %x
instruction at the position specified by the instruction builder b.
|
| build_fpcast [Llvm] | build_fpcast v ty name b creates a fpext, bitcast, or fptrunc
instruction at the position specified by the instruction builder b.
|
| build_fpext [Llvm] | build_fpext v ty name b creates a
%name = fpext %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_fptosi [Llvm] | build_fptosi v ty name b creates a
%name = fptosi %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_fptoui [Llvm] | build_fptoui v ty name b creates a
%name = fptoui %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_fptrunc [Llvm] | build_fptrunc v ty name b creates a
%name = fptrunc %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_free [Llvm] | build_free p b creates a free
instruction at the position specified by the instruction builder b.
|
| build_frem [Llvm] | build_frem x y name b creates a
%name = frem %x, %y
instruction at the position specified by the instruction builder b.
|
| build_fsub [Llvm] | build_fsub x y name b creates a
%name = fsub %x, %y
instruction at the position specified by the instruction builder b.
|
| build_gep [Llvm] | build_gep p indices name b creates a
%name = getelementptr %p, indices...
instruction at the position specified by the instruction builder b.
|
| build_global_string [Llvm] | build_global_string str name b creates a series of instructions that adds
a global string at the position specified by the instruction builder b.
|
| build_global_stringptr [Llvm] | build_global_stringptr str name b creates a series of instructions that
adds a global string pointer at the position specified by the instruction
builder b.
|
| build_icmp [Llvm] | build_icmp pred x y name b creates a
%name = icmp %pred %x, %y
instruction at the position specified by the instruction builder b.
|
| build_in_bounds_gep [Llvm] | build_in_bounds_gep p indices name b creates a
%name = gelementptr inbounds %p, indices...
instruction at the position specified by the instruction builder b.
|
| build_indirect_br [Llvm] | build_indirect_br addr count b creates a
indirectbr %addr
instruction at the position specified by the instruction builder b with
space reserved for count destinations.
|
| build_insertelement [Llvm] | build_insertelement vec elt i name b creates a
%name = insertelement %vec, %elt, %i
instruction at the position specified by the instruction builder b.
|
| build_insertvalue [Llvm] | build_insertvalue agg val idx name b creates a
%name = insertvalue %agg, %val, %idx
instruction at the position specified by the instruction builder b.
|
| build_intcast [Llvm] | build_intcast v ty name b creates a zext, bitcast, or trunc
instruction at the position specified by the instruction builder b.
|
| build_inttoptr [Llvm] | build_inttoptr v ty name b creates a
%name = inttoptr %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_invoke [Llvm] | build_invoke fn args tobb unwindbb name b creates an
%name = invoke %fn(args) to %tobb unwind %unwindbb
instruction at the position specified by the instruction builder b.
|
| build_is_not_null [Llvm] | build_is_not_null val name b creates a
%name = icmp ne %val, null
instruction at the position specified by the instruction builder b.
|
| build_is_null [Llvm] | build_is_null val name b creates a
%name = icmp eq %val, null
instruction at the position specified by the instruction builder b.
|
| build_landingpad [Llvm] | build_landingpad ty persfn numclauses name b creates an
landingpad
instruction at the position specified by the instruction builder b.
|
| build_load [Llvm] | build_load v name b creates a
%name = load %v
instruction at the position specified by the instruction builder b.
|
| build_lshr [Llvm] | build_lshr x y name b creates a
%name = lshr %x, %y
instruction at the position specified by the instruction builder b.
|
| build_malloc [Llvm] | build_malloc ty name b creates an malloc
instruction at the position specified by the instruction builder b.
|
| build_mul [Llvm] | build_mul x y name b creates a
%name = mul %x, %y
instruction at the position specified by the instruction builder b.
|
| build_neg [Llvm] | build_neg x name b creates a
%name = sub 0, %x
instruction at the position specified by the instruction builder b.
|
| build_not [Llvm] | build_xor x name b creates a
%name = xor %x, -1
instruction at the position specified by the instruction builder b.
|
| build_nsw_add [Llvm] | build_nsw_add x y name b creates a
%name = nsw add %x, %y
instruction at the position specified by the instruction builder b.
|
| build_nsw_mul [Llvm] | build_nsw_mul x y name b creates a
%name = nsw mul %x, %y
instruction at the position specified by the instruction builder b.
|
| build_nsw_neg [Llvm] | build_nsw_neg x name b creates a
%name = nsw sub 0, %x
instruction at the position specified by the instruction builder b.
|
| build_nsw_sub [Llvm] | build_nsw_sub x y name b creates a
%name = nsw sub %x, %y
instruction at the position specified by the instruction builder b.
|
| build_nuw_add [Llvm] | build_nuw_add x y name b creates a
%name = nuw add %x, %y
instruction at the position specified by the instruction builder b.
|
| build_nuw_mul [Llvm] | build_nuw_mul x y name b creates a
%name = nuw mul %x, %y
instruction at the position specified by the instruction builder b.
|
| build_nuw_neg [Llvm] | build_nuw_neg x name b creates a
%name = nuw sub 0, %x
instruction at the position specified by the instruction builder b.
|
| build_nuw_sub [Llvm] | build_nuw_sub x y name b creates a
%name = nuw sub %x, %y
instruction at the position specified by the instruction builder b.
|
| build_or [Llvm] | build_or x y name b creates a
%name = or %x, %y
instruction at the position specified by the instruction builder b.
|
| build_phi [Llvm] | build_phi incoming name b creates a
%name = phi %incoming
instruction at the position specified by the instruction builder b.
|
| build_pointercast [Llvm] | build_pointercast v ty name b creates a bitcast or pointer-to-int
instruction at the position specified by the instruction builder b.
|
| build_ptrdiff [Llvm] | build_ptrdiff lhs rhs name b creates a series of instructions that measure
the difference between two pointer values at the position specified by the
instruction builder b.
|
| build_ptrtoint [Llvm] | build_ptrtoint v ty name b creates a
%name = prtotint %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_resume [Llvm] | build_resume exn b builds a resume exn instruction
at the position specified by the instruction builder b.
|
| build_ret [Llvm] | build_ret v b creates a
ret %v
instruction at the position specified by the instruction builder b.
|
| build_ret_void [Llvm] | build_ret_void b creates a
ret void
instruction at the position specified by the instruction builder b.
|
| build_sdiv [Llvm] | build_sdiv x y name b creates a
%name = sdiv %x, %y
instruction at the position specified by the instruction builder b.
|
| build_select [Llvm] | build_select cond thenv elsev name b creates a
%name = select %cond, %thenv, %elsev
instruction at the position specified by the instruction builder b.
|
| build_sext [Llvm] | build_sext v ty name b creates a
%name = sext %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_sext_or_bitcast [Llvm] | build_sext_or_bitcast v ty name b creates a sext or bitcast
instruction at the position specified by the instruction builder b.
|
| build_shl [Llvm] | build_shl x y name b creates a
%name = shl %x, %y
instruction at the position specified by the instruction builder b.
|
| build_shufflevector [Llvm] | build_shufflevector veca vecb mask name b creates a
%name = shufflevector %veca, %vecb, %mask
instruction at the position specified by the instruction builder b.
|
| build_sitofp [Llvm] | build_sitofp v ty name b creates a
%name = sitofp %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_srem [Llvm] | build_SRem x y name b creates a
%name = srem %x, %y
instruction at the position specified by the instruction builder b.
|
| build_store [Llvm] | build_store v p b creates a
store %v, %p
instruction at the position specified by the instruction builder b.
|
| build_struct_gep [Llvm] | build_struct_gep p idx name b creates a
%name = getelementptr %p, 0, idx
instruction at the position specified by the instruction builder b.
|
| build_sub [Llvm] | build_sub x y name b creates a
%name = sub %x, %y
instruction at the position specified by the instruction builder b.
|
| build_switch [Llvm] | build_switch case elsebb count b creates an empty
switch %case, %elsebb
instruction at the position specified by the instruction builder b with
space reserved for count cases.
|
| build_trunc [Llvm] | build_trunc v ty name b creates a
%name = trunc %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_trunc_or_bitcast [Llvm] | build_trunc_or_bitcast v ty name b creates a trunc or bitcast
instruction at the position specified by the instruction builder b.
|
| build_udiv [Llvm] | build_udiv x y name b creates a
%name = udiv %x, %y
instruction at the position specified by the instruction builder b.
|
| build_uitofp [Llvm] | build_uitofp v ty name b creates a
%name = uitofp %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_unreachable [Llvm] | build_unreachable b creates an
unreachable
instruction at the position specified by the instruction builder b.
|
| build_urem [Llvm] | build_urem x y name b creates a
%name = urem %x, %y
instruction at the position specified by the instruction builder b.
|
| build_va_arg [Llvm] | build_va_arg valist argty name b creates a
%name = va_arg %valist, %argty
instruction at the position specified by the instruction builder b.
|
| build_xor [Llvm] | build_xor x y name b creates a
%name = xor %x, %y
instruction at the position specified by the instruction builder b.
|
| build_zext [Llvm] | build_zext v ty name b creates a
%name = zext %p to %ty
instruction at the position specified by the instruction builder b.
|
| build_zext_or_bitcast [Llvm] | build_zext_or_bitcast v ty name b creates a zext or bitcast
instruction at the position specified by the instruction builder b.
|
| builder [Llvm] | builder context creates an instruction builder with no position in
the context context.
|
| builder_at [Llvm] | builder_at ip creates an instruction builder positioned at ip.
|
| builder_at_end [Llvm] | builder_at_end bb creates an instruction builder positioned at the end of
the basic block bb.
|
| builder_before [Llvm] | builder_before ins creates an instruction builder positioned before the
instruction isn.
|
| by_name [Llvm_target.Target] | by_name name returns Some t if a target t named name is
registered, or None otherwise.
|
| by_triple [Llvm_target.Target] | by_triple triple returns a target for a triple triple, or raises
Error if triple does not correspond to a registered target.
|
| byte_order [Llvm_target.DataLayout] |
Returns the byte order of a target, either
Endian.Big or
Endian.Little.
|
C | |
| c [Llvm.CallConv] | c is the C calling convention.
|
| classify_type [Llvm] | |
| classify_value [Llvm] | classify_value v returns the kind of the value v.
|
| clear_current_debug_location [Llvm] | clear_current_debug_location b clears the current debug location in the
builder b.
|
| clear_metadata [Llvm] | clear_metadata i kind clears the metadata of kind kind in the
instruction i.
|
| clone_module [Llvm_transform_utils] | clone_module m returns an exact copy of module m.
|
| cold [Llvm.CallConv] | cold is the calling convention for
callee-save.
|
| condition [Llvm] | condition v return the condition of the branch instruction v.
|
| const_add [Llvm] | const_add c1 c2 returns the constant sum of two constants.
|
| const_all_ones [Llvm] | const_all_ones ty returns the constant '-1' of the integer or vector type
ty.
|
| const_and [Llvm] | const_and c1 c2 returns the constant bitwise AND of two integer
constants.
|
| const_array [Llvm] | const_array ty elts returns the constant array of type
array_type ty (Array.length elts) and containing the values elts.
|
| const_ashr [Llvm] | const_ashr c1 c2 returns the constant integer c1 right-shifted by the
constant integer c2 with sign extension.
|
| const_bitcast [Llvm] | const_bitcast c ty returns the constant bitwise conversion of constant c
to type ty of equal size.
|
| const_element [Llvm] | const_element c returns a constant for a specified index's element.
|
| const_exact_sdiv [Llvm] | const_exact_sdiv c1 c2 returns the constant quotient c1 / c2 of two
signed integer constants.
|
| const_extractelement [Llvm] | const_extractelement vec i returns the constant ith element of
constant vector vec.
|
| const_extractvalue [Llvm] | const_extractvalue agg idxs returns the constant idxsth value of
constant aggregate agg.
|
| const_fadd [Llvm] | const_fadd c1 c2 returns the constant sum of two constant floats.
|
| const_fcmp [Llvm] | const_fcmp pred c1 c2 returns the constant comparison of two floating
point constants, c1 pred c2.
|
| const_fdiv [Llvm] | const_fdiv c1 c2 returns the constant quotient c1 / c2 of two floating
point constants.
|
| const_float [Llvm] | const_float ty n returns the floating point constant of type ty and
value n.
|
| const_float_of_string [Llvm] | const_float_of_string ty s returns the floating point constant of type
ty and value n.
|
| const_fmul [Llvm] | const_fmul c1 c2 returns the constant product of two constants floats.
|
| const_fneg [Llvm] | const_fneg c returns the arithmetic negation of the constant float c.
|
| const_fpcast [Llvm] | const_fpcast c ty returns a constant fpext, bitcast, or fptrunc for fp ->
fp casts of constant c to type ty.
|
| const_fpext [Llvm] | const_fpext c ty returns the constant extension of floating point constant
c to the larger floating point type ty.
|
| const_fptosi [Llvm] | const_fptoui c ty returns the constant unsigned integer conversion of
floating point constant c to integer type ty.
|
| const_fptoui [Llvm] | const_fptoui c ty returns the constant unsigned integer conversion of
floating point constant c to integer type ty.
|
| const_fptrunc [Llvm] | const_fptrunc c ty returns the constant truncation of floating point
constant c to the smaller floating point type ty.
|
| const_frem [Llvm] | const_frem c1 c2 returns the constant remainder c1 MOD c2 of two
signed floating point constants.
|
| const_fsub [Llvm] | const_fsub c1 c2 returns the constant difference, c1 - c2, of two
constant floats.
|
| const_gep [Llvm] | const_gep pc indices returns the constant getElementPtr of pc with the
constant integers indices from the array indices.
|
| const_icmp [Llvm] | const_icmp pred c1 c2 returns the constant comparison of two integer
constants, c1 pred c2.
|
| const_in_bounds_gep [Llvm] | const_in_bounds_gep pc indices returns the constant getElementPtr of pc
with the constant integers indices from the array indices.
|
| const_inline_asm [Llvm] | const_inline_asm ty asm con side align inserts a inline assembly string.
|
| const_insertelement [Llvm] | const_insertelement vec v i returns the constant vector with the same
elements as constant vector v but the ith element replaced by the
constant v.
|
| const_insertvalue [Llvm] | const_insertvalue agg val idxs inserts the value val in the specified
indexs idxs in the aggegate agg.
|
| const_int [Llvm] | const_int ty i returns the integer constant of type ty and value i.
|
| const_int_of_string [Llvm] | const_int_of_string ty s r returns the integer constant of type ty and
value s, with the radix r.
|
| const_intcast [Llvm] | const_intcast c ty ~is_signed returns a constant sext/zext, bitcast,
or trunc for integer -> integer casts of constant c to type ty.
|
| const_inttoptr [Llvm] | const_inttoptr c ty returns the constant pointer conversion of
integer constant c to pointer type ty.
|
| const_lshr [Llvm] | const_lshr c1 c2 returns the constant integer c1 right-shifted by the
constant integer c2 with zero extension.
|
| const_mul [Llvm] | const_mul c1 c2 returns the constant product of two constants.
|
| const_named_struct [Llvm] | const_named_struct namedty elts returns the structured constant of type
namedty (which must be a named structure type) and containing the values elts.
|
| const_neg [Llvm] | const_neg c returns the arithmetic negation of the constant c.
|
| const_not [Llvm] | const_not c returns the bitwise inverse of the constant c.
|
| const_nsw_add [Llvm] | const_nsw_add c1 c2 returns the constant sum of two constants with no
signed wrapping.
|
| const_nsw_mul [Llvm] | const_nsw_mul c1 c2 returns the constant product of two constants with
no signed wrapping.
|
| const_nsw_neg [Llvm] | const_nsw_neg c returns the arithmetic negation of the constant c with
no signed wrapping.
|
| const_nsw_sub [Llvm] | const_nsw_sub c1 c2 returns the constant difference of two constants with
no signed wrapping.
|
| const_null [Llvm] | const_null ty returns the constant null (zero) of the type ty.
|
| const_nuw_add [Llvm] | const_nuw_add c1 c2 returns the constant sum of two constants with no
unsigned wrapping.
|
| const_nuw_mul [Llvm] | const_nuw_mul c1 c2 returns the constant product of two constants with
no unsigned wrapping.
|
| const_nuw_neg [Llvm] | const_nuw_neg c returns the arithmetic negation of the constant c with
no unsigned wrapping.
|
| const_nuw_sub [Llvm] | const_nuw_sub c1 c2 returns the constant difference of two constants with
no unsigned wrapping.
|
| const_of_int64 [Llvm] | const_of_int64 ty i returns the integer constant of type ty and value
i.
|
| const_or [Llvm] | const_or c1 c2 returns the constant bitwise OR of two integer
constants.
|
| const_packed_struct [Llvm] | const_packed_struct context elts returns the structured constant of
type Llvm.packed_struct_type (Array.map type_of elts) and containing the
values elts in the context context.
|
| const_pointer_null [Llvm] | const_pointer_null ty returns the constant null (zero) pointer of the type
ty.
|
| const_pointercast [Llvm] | const_pointercast c ty returns a constant bitcast or a pointer-to-int
cast conversion of constant c to type ty of equal size.
|
| const_ptrtoint [Llvm] | const_ptrtoint c ty returns the constant integer conversion of
pointer constant c to integer type ty.
|
| const_sdiv [Llvm] | const_sdiv c1 c2 returns the constant quotient c1 / c2 of two signed
integer constants.
|
| const_select [Llvm] | const_select cond t f returns the constant conditional which returns value
t if the boolean constant cond is true and the value f otherwise.
|
| const_sext [Llvm] | const_sext c ty returns the constant sign extension of integer constant
c to the larger integer type ty.
|
| const_sext_or_bitcast [Llvm] | const_sext_or_bitcast c ty returns a constant sext or bitwise cast
conversion of constant c to type ty.
|
| const_shl [Llvm] | const_shl c1 c2 returns the constant integer c1 left-shifted by the
constant integer c2.
|
| const_shufflevector [Llvm] | const_shufflevector a b mask returns a constant shufflevector.
|
| const_sitofp [Llvm] | const_sitofp c ty returns the constant floating point conversion of
signed integer constant c to the floating point type ty.
|
| const_srem [Llvm] | const_srem c1 c2 returns the constant remainder c1 MOD c2 of two
signed integer constants.
|
| const_string [Llvm] | const_string c s returns the constant i8 array with the values of the
characters in the string s in the context c.
|
| const_stringz [Llvm] | const_stringz c s returns the constant i8 array with the values of the
characters in the string s and a null terminator in the context c.
|
| const_struct [Llvm] | const_struct context elts returns the structured constant of type
struct_type (Array.map type_of elts) and containing the values elts
in the context context.
|
| const_sub [Llvm] | const_sub c1 c2 returns the constant difference, c1 - c2, of two
constants.
|
| const_trunc [Llvm] | const_trunc c ty returns the constant truncation of integer constant c
to the smaller integer type ty.
|
| const_trunc_or_bitcast [Llvm] | const_trunc_or_bitcast c ty returns a constant trunc or bitwise cast
conversion of constant c to type ty.
|
| const_udiv [Llvm] | const_udiv c1 c2 returns the constant quotient c1 / c2 of two unsigned
integer constants.
|
| const_uitofp [Llvm] | const_uitofp c ty returns the constant floating point conversion of
unsigned integer constant c to the floating point type ty.
|
| const_urem [Llvm] | const_urem c1 c2 returns the constant remainder c1 MOD c2 of two
unsigned integer constants.
|
| const_vector [Llvm] | const_vector elts returns the vector constant of type
vector_type (type_of elts.(0)) (Array.length elts) and containing the
values elts.
|
| const_xor [Llvm] | const_xor c1 c2 returns the constant bitwise XOR of two integer
constants.
|
| const_zext [Llvm] | const_zext c ty returns the constant zero extension of integer constant
c to the larger integer type ty.
|
| const_zext_or_bitcast [Llvm] | const_zext_or_bitcast c ty returns a constant zext or bitwise cast
conversion of constant c to type ty.
|
| constexpr_opcode [Llvm] | constexpr_opcode v returns an Opcode.t corresponding to constexpr
value v, or Opcode.Invalid if v is not a constexpr.
|
| cpu [Llvm_target.TargetMachine] |
Returns the CPU used while creating this target machine.
|
| create [Llvm_target.TargetMachine] |
Creates a new target machine.
|
| create [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder function.
|
| create [Llvm_executionengine] | create m optlevel creates a new MCJIT just-in-time compiler, taking
ownership of the module m if successful with the desired optimization
level optlevel.
|
| create [Llvm.PassManager] | PassManager.create () constructs a new whole-module pass pipeline.
|
| create_context [Llvm] | create_context () creates a context for storing the "global" state in
LLVM.
|
| create_function [Llvm.PassManager] | PassManager.create_function m constructs a new function-by-function
pass pipeline over the module m.
|
| create_module [Llvm] | create_module context id creates a module with the supplied module ID in
the context context.
|
| current_debug_location [Llvm] | current_debug_location b returns the current debug location, or None
if none is currently set.
|
D | |
| data_layout [Llvm_target.TargetMachine] |
Returns the data layout of this target machine.
|
| data_layout [Llvm_executionengine] | data_layout ee is the data layout of the execution engine ee.
|
| data_layout [Llvm] | data_layout m is the data layout specifier for the module m, something
like e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-...-a0:0:64-f80:128:128.
|
| declare_function [Llvm] | declare_function name ty m returns a new function of type ty and
with name name in module m.
|
| declare_global [Llvm] | declare_global ty name m returns a new global variable of type ty and
with name name in module m in the default address space (0).
|
| declare_qualified_global [Llvm] | declare_qualified_global ty name addrspace m returns a new global variable
of type ty and with name name in module m in the address space
addrspace.
|
| default_compiler_options [Llvm_executionengine] |
Default MCJIT compiler options:
{ opt_level = 0; code_model = CodeModel.JIT_default;
no_framepointer_elim = false; enable_fast_isel = false }
|
| default_triple [Llvm_target.Target] | default_triple () returns the default target triple for current
platform.
|
| define_function [Llvm] | define_function name ty m creates a new function with name name and
type ty in module m.
|
| define_global [Llvm] | define_global name init m returns a new global with name name and
initializer init in module m in the default address space (0).
|
| define_qualified_global [Llvm] | define_qualified_global name init addrspace m returns a new global with
name name and initializer init in module m in the address space
addrspace.
|
| delete_block [Llvm] | delete_block bb deletes the basic block bb.
|
| delete_function [Llvm] | delete_function f destroys the function f.
|
| delete_global [Llvm] | delete_global gv destroys the global variable gv.
|
| delete_instruction [Llvm] | delete_instruction i deletes the instruction i.
|
| description [Llvm_target.Target] |
Returns the description of a target.
|
| dispose [Llvm_executionengine] | dispose ee releases the memory used by the execution engine and must be
invoked to avoid memory leaks.
|
| dispose [Llvm.PassManager] |
Frees the memory of a pass pipeline.
|
| dispose [Llvm.MemoryBuffer] |
Disposes of a memory buffer.
|
| dispose_context [Llvm] | destroy_context () destroys a context.
|
| dispose_module [Llvm] | dispose_module m destroys a module m and all of the IR objects it
contained.
|
| dll_storage_class [Llvm] | dll_storage_class g returns the DLL storage class of the global value g.
|
| double_type [Llvm] | double_type c returns the IEEE 64-bit floating point type in the context
c.
|
| dump_module [Llvm] | dump_module m prints the .ll representation of the module m to standard
error.
|
| dump_type [Llvm] | dump_type ty prints the .ll representation of the type ty to standard
error.
|
| dump_value [Llvm] | dump_value v prints the .ll representation of the value v to standard
error.
|
E | |
| element_at_offset [Llvm_target.DataLayout] |
Computes the structure element that contains the byte offset for a target.
|
| element_type [Llvm] | element_type ty returns the element type of the pointer, vector, or array
type ty.
|
| emit_to_file [Llvm_target.TargetMachine] |
Emits assembly or object data for the given module to the given
file or raise
Error.
|
| emit_to_memory_buffer [Llvm_target.TargetMachine] |
Emits assembly or object data for the given module to a fresh memory
buffer or raise
Error.
|
| enable_pretty_stacktrace [Llvm] | enable_pretty_stacktraces () enables LLVM's built-in stack trace code.
|
| entry_block [Llvm] | entry_block fn returns the entry basic block of the function f.
|
F | |
| fast [Llvm.CallConv] | fast is the calling convention to allow LLVM
maximum optimization opportunities.
|
| fcmp_predicate [Llvm] | fcmp_predicate i returns the fcmp.t corresponding to an fcmp
instruction i.
|
| features [Llvm_target.TargetMachine] |
Returns the feature string used while creating this target machine.
|
| finalize [Llvm.PassManager] | finalize fpm finalizes all of the function passes scheduled in in the
function pass manager fpm.
|
| first [Llvm_target.Target] | first () returns the first target in the registered targets
list, or None.
|
| float_of_const [Llvm] | float_of_const c returns the float value of the c constant float.
|
| float_type [Llvm] | float_type c returns the IEEE 32-bit floating point type in the context
c.
|
| fold_left_blocks [Llvm] | fold_left_blocks f init fn is f (... (f init b1) ...) bN where
b1,...,bN are the basic blocks of function fn.
|
| fold_left_functions [Llvm] | fold_left_function f init m is f (... (f init f1) ...) fN where
f1,...,fN are the functions of module m.
|
| fold_left_globals [Llvm] | fold_left_globals f init m is f (... (f init g1) ...) gN where
g1,...,gN are the global variables of module m.
|
| fold_left_instrs [Llvm] | fold_left_instrs f init bb is f (... (f init g1) ...) gN where
g1,...,gN are the instructions of basic block bb.
|
| fold_left_params [Llvm] | fold_left_params f init fn is f (... (f init b1) ...) bN where
b1,...,bN are the parameters of function fn.
|
| fold_left_uses [Llvm] | fold_left_uses f init v is f (... (f init u1) ...) uN where
u1,...,uN are the users of the value v.
|
| fold_right_blocks [Llvm] | fold_right_blocks f fn init is f (... (f init bN) ...) b1 where
b1,...,bN are the basic blocks of function fn.
|
| fold_right_functions [Llvm] | fold_right_functions f m init is f (... (f init fN) ...) f1 where
f1,...,fN are the functions of module m.
|
| fold_right_globals [Llvm] | fold_right_globals f m init is f g1 (... (f gN init) ...) where
g1,...,gN are the global variables of module m.
|
| fold_right_instrs [Llvm] | fold_right_instrs f bb init is f (... (f init fN) ...) f1 where
f1,...,fN are the instructions of basic block bb.
|
| fold_right_params [Llvm] | fold_right_params f fn init is f (... (f init bN) ...) b1 where
b1,...,bN are the parameters of function fn.
|
| fold_right_uses [Llvm] | fold_right_uses f v init is f u1 (... (f uN init) ...) where
u1,...,uN are the users of the value v.
|
| fold_successors [Llvm] | fold_successors f v init is f (... (f init vN) ...) v1 where v1,...,vN are the successors of v.
|
| fp128_type [Llvm] | fp128_type c returns the IEEE 128-bit floating point type in the context
c.
|
| function_attr [Llvm] | function_attr f returns the function attribute for the function f.
|
| function_begin [Llvm] | function_begin m returns the first position in the function list of the
module m.
|
| function_call_conv [Llvm] | function_call_conv f returns the calling convention of the function f.
|
| function_end [Llvm] | function_end m returns the last position in the function list of
the module m.
|
| function_pred [Llvm] | function_pred gv returns the function list position preceding After gv.
|
| function_succ [Llvm] | function_succ gv returns the function list position succeeding
Before gv.
|
| function_type [Llvm] | function_type ret_ty param_tys returns the function type returning
ret_ty and taking param_tys as parameters.
|
G | |
| gc [Llvm] | gc f returns Some name if the function f has a garbage
collection algorithm specified and None otherwise.
|
| get_branch [Llvm] | get_branch c returns a description of the branch instruction c.
|
| get_function_address [Llvm_executionengine] | get_function_address fn typ ee returns a pointer to the function
fn as type typ, which will be a pointer type for a function
(e.g.
|
| get_global_value_address [Llvm_executionengine] | get_global_value_address id typ ee returns a pointer to the
identifier id as type typ, which will be a pointer type for a
value, and which will be live as long as id and ee
are.
|
| get_mdstring [Llvm] | get_mdstring v returns the MDString.
|
| get_module [Llvm_bitreader] | get_module context mb reads the bitcode for a new module m from the
memory buffer mb in the context context.
|
| get_named_metadata [Llvm] | get_named_metadata m name returns all the MDNodes belonging to the named
metadata (if any).
|
| global_begin [Llvm] | global_begin m returns the first position in the global variable list of
the module m.
|
| global_context [Llvm] |
See the function
llvm::getGlobalContext.
|
| global_end [Llvm] | global_end m returns the last position in the global variable list of the
module m.
|
| global_initializer [Llvm] | global_initializer gv returns the initializer for the global variable
gv.
|
| global_parent [Llvm] | global_parent g is the enclosing module of the global value g.
|
| global_pred [Llvm] | global_pred gv returns the global variable list position preceding
After gv.
|
| global_succ [Llvm] | global_succ gv returns the global variable list position succeeding
Before gv.
|
H | |
| has_asm_backend [Llvm_target.Target] |
Returns
true if the target has an ASM backend (required for
emitting output).
|
| has_jit [Llvm_target.Target] |
Returns
true if the target has a JIT.
|
| has_metadata [Llvm] | has_metadata i returns whether or not the instruction i has any
metadata attached to it.
|
| has_target_machine [Llvm_target.Target] |
Returns
true if the target has a target machine associated.
|
I | |
| i16_type [Llvm] | i16_type c returns an integer type of bitwidth 16 in the context c.
|
| i1_type [Llvm] | i1_type c returns an integer type of bitwidth 1 in the context c.
|
| i32_type [Llvm] | i32_type c returns an integer type of bitwidth 32 in the context c.
|
| i64_type [Llvm] | i64_type c returns an integer type of bitwidth 64 in the context c.
|
| i8_type [Llvm] | i8_type c returns an integer type of bitwidth 8 in the context c.
|
| icmp_predicate [Llvm] | icmp_predicate i returns the Icmp.t corresponding to an icmp
instruction i.
|
| incoming [Llvm] | incoming pn returns the list of value-block pairs for phi node pn.
|
| initialize [Llvm_executionengine] | initialize () initializes the backend corresponding to the host.
|
| initialize [Llvm_all_backends] | |
| initialize [Llvm_X86] | |
| initialize [Llvm.PassManager] | initialize fpm initializes all of the function passes scheduled in the
function pass manager fpm.
|
| insert_block [Llvm] | insert_block c name bb creates a new basic block named name before the
basic block bb in the context c.
|
| insert_into_builder [Llvm] | insert_into_builder i name b inserts the specified instruction i at the
position specified by the instruction builder b.
|
| insertion_block [Llvm] | insertion_block b returns the basic block that the builder b is
positioned to insert into.
|
| install_fatal_error_handler [Llvm] | install_fatal_error_handler f installs f as LLVM's fatal error handler.
|
| instr_begin [Llvm] | instr_begin bb returns the first position in the instruction list of the
basic block bb.
|
| instr_clone [Llvm] | inst_clone i returns a copy of instruction i,
The instruction has no parent, and no name.
|
| instr_end [Llvm] | instr_end bb returns the last position in the instruction list of the
basic block bb.
|
| instr_opcode [Llvm] | inst_opcode i returns the Opcode.t corresponding to instruction i,
or Opcode.Invalid if i is not an instruction.
|
| instr_parent [Llvm] | instr_parent i is the enclosing basic block of the instruction i.
|
| instr_pred [Llvm] | instr_pred i returns the instruction list position preceding After i.
|
| instr_succ [Llvm] | instr_succ i returns the instruction list position succeeding Before i.
|
| instruction_call_conv [Llvm] | instruction_call_conv ci is the calling convention for the call or invoke
instruction ci, which may be one of the values from the module
Llvm.CallConv.
|
| int64_of_const [Llvm] | int64_of_const c returns the int64 value of the c constant integer.
|
| integer_bitwidth [Llvm] | integer_bitwidth c ty returns the number of bits in the integer type ty
in the context c.
|
| integer_type [Llvm] | integer_type c n returns an integer type of bitwidth n in the context
c.
|
| intptr_type [Llvm_target.DataLayout] |
Returns the integer type that is the same size as a pointer on a target.
|
| is_conditional [Llvm] | is_conditional v returns true if the branch instruction v is conditional.
|
| is_constant [Llvm] | is_constant v returns true if the value v is a constant, false
otherwise.
|
| is_declaration [Llvm] | is_declaration g returns true if the global value g is a declaration
only.
|
| is_externally_initialized [Llvm] | is_externally_initialized gv returns true if the global
variable gv is externally initialized and false otherwise.
|
| is_global_constant [Llvm] | is_global_constant gv returns true if the global variabile gv is a
constant.
|
| is_intrinsic [Llvm] | is_intrinsic f returns true if the function f is an intrinsic.
|
| is_null [Llvm] | is_null v returns true if the value v is the null (zero) value.
|
| is_opaque [Llvm] | is_opaque sty returns true if the structure type sty is opaque.
|
| is_packed [Llvm] | is_packed sty returns true if the structure type sty is packed,
false otherwise.
|
| is_tail_call [Llvm] | is_tail_call ci is true if the call instruction ci is flagged as
eligible for tail call optimization, false otherwise.
|
| is_terminator [Llvm] | is_terminator v returns true if the instruction v is a terminator.
|
| is_thread_local [Llvm] | is_thread_local gv returns true if the global variable gv is
thread-local and false otherwise.
|
| is_undef [Llvm] | is_undef v returns true if the value v is an undefined value, false
otherwise.
|
| is_var_arg [Llvm] | is_var_arg fty returns true if fty is a varargs function type, false
otherwise.
|
| is_volatile [Llvm] | is_volatile i is true if the load or store instruction i is marked
as volatile.
|
| iter_blocks [Llvm] | iter_blocks f fn applies function f to each of the basic blocks
of function fn in order.
|
| iter_functions [Llvm] | iter_functions f m applies function f to each of the functions of module
m in order.
|
| iter_globals [Llvm] | iter_globals f m applies function f to each of the global variables of
module m in order.
|
| iter_instrs [Llvm] | iter_instrs f bb applies function f to each of the instructions of basic
block bb in order.
|
| iter_params [Llvm] | iter_params f fn applies function f to each of the parameters
of function fn in order.
|
| iter_successors [Llvm] | iter_successors f v applies function f to each successor v in order.
|
| iter_uses [Llvm] | iter_uses f v applies function f to each of the users of the value v
in order.
|
L | |
| label_type [Llvm] | label_type c creates a type of a basic block in the context c.
|
| link_modules [Llvm_linker] | link_modules dst src mode links src into dst, raising Error
if the linking fails.
|
| linkage [Llvm] | linkage g returns the linkage of the global value g.
|
| lookup_function [Llvm] | lookup_function name m returns Some f if a function with name
name exists in module m.
|
| lookup_global [Llvm] | lookup_global name m returns Some g if a global variable with name
name exists in module m.
|
M | |
| mdkind_id [Llvm] | mdkind_id context name returns the MDKind ID that corresponds to the
name name in the context context.
|
| mdnode [Llvm] | mdnode c elts returns the MDNode containing the values elts in the
context c.
|
| mdnull [Llvm] | mdnull c returns a null MDNode in context c.
|
| mdstring [Llvm] | mdstring c s returns the MDString of the string s in the context c.
|
| metadata [Llvm] | metadata i kind optionally returns the metadata associated with the
kind kind in the instruction i See the function
llvm::Instruction::getMetadata.
|
| module_context [Llvm] | module_context m returns the context of the specified module.
|
| move_block_after [Llvm] | move_block_after pos bb moves the basic block bb after pos.
|
| move_block_before [Llvm] | move_block_before pos bb moves the basic block bb before pos.
|
N | |
| name [Llvm_target.Target] |
Returns the name of a target.
|
| named_struct_type [Llvm] | named_struct_type context name returns the named structure type name
in the context context.
|
| num_operands [Llvm] | num_operands v returns the number of operands for the value v.
|
| num_successors [Llvm] | num_successors v returns the number of successors for the value v.
|
O | |
| of_file [Llvm.MemoryBuffer] | of_file p is the memory buffer containing the contents of the file at
path p.
|
| of_stdin [Llvm.MemoryBuffer] | of_stdin () is the memory buffer containing the contents of standard input.
|
| of_string [Llvm_target.DataLayout] | of_string rep parses the data layout string representation rep.
|
| of_string [Llvm.MemoryBuffer] | of_string ~name s is the memory buffer containing the contents of string s.
|
| offset_of_element [Llvm_target.DataLayout] |
Computes the byte offset of the indexed struct element for a target.
|
| operand [Llvm] | operand v i returns the operand at index i for the value v.
|
| operand_use [Llvm] | operand_use v i returns the use of the operand at index i for the value v.
|
| output_bitcode [Llvm_bitwriter] | output_bitcode ~unbuffered c m writes the bitcode for module m
to the channel c.
|
P | |
| packed_struct_type [Llvm] | packed_struct_type context ys returns the packed structure type in the
context context containing in the types in the array tys.
|
| param [Llvm] | param f n returns the nth parameter of function f.
|
| param_attr [Llvm] | param_attr p returns the attributes of parameter p.
|
| param_begin [Llvm] | param_begin f returns the first position in the parameter list of the
function f.
|
| param_end [Llvm] | param_end f returns the last position in the parameter list of
the function f.
|
| param_parent [Llvm] | param_parent p returns the parent function that owns the parameter.
|
| param_pred [Llvm] | param_pred gv returns the function list position preceding After gv.
|
| param_succ [Llvm] | param_succ bb returns the parameter list position succeeding
Before bb.
|
| param_types [Llvm] | param_types fty gets the parameter types of the function type fty.
|
| params [Llvm] | params f returns the parameters of function f.
|
| parse_bitcode [Llvm_bitreader] | parse_bitcode context mb parses the bitcode for a new module m from the
memory buffer mb in the context context.
|
| parse_command_line_options [Llvm] | parse_command_line_options ?overview args parses args using
the LLVM command line parser.
|
| parse_ir [Llvm_irreader] | parse_ir context mb parses the IR for a new module m from the
memory buffer mb in the context context.
|
| pointer_size [Llvm_target.DataLayout] |
Returns the pointer size in bytes for a target.
|
| pointer_type [Llvm] | pointer_type ty returns the pointer type referencing objects of type
ty in the default address space (0).
|
| populate_function_pass_manager [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::populateFunctionPassManager function.
|
| populate_lto_pass_manager [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::populateLTOPassManager function.
|
| populate_module_pass_manager [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::populateModulePassManager function.
|
| position_at_end [Llvm] | position_at_end bb b moves the instruction builder b to the end of the
basic block bb.
|
| position_before [Llvm] | position_before ins b moves the instruction builder b to before the
instruction isn.
|
| position_builder [Llvm] | position_builder ip bb moves the instruction builder bb to the position
ip.
|
| ppc_fp128_type [Llvm] | ppc_fp128_type c returns the PowerPC 128-bit floating point type in the
context c.
|
| preferred_align [Llvm_target.DataLayout] |
Computes the preferred alignment of a type in bytes for a target.
|
| preferred_align_of_global [Llvm_target.DataLayout] |
Computes the preferred alignment of a global variable in bytes for
a target.
|
| print_module [Llvm] | print_module f m prints the .ll representation of the module m
to file f.
|
Q | |
| qualified_intptr_type [Llvm_target.DataLayout] |
Returns the integer type that is the same size as a pointer on a target
in a given address space.
|
| qualified_pointer_size [Llvm_target.DataLayout] |
Returns the pointer size in bytes for a target in a given address space.
|
| qualified_pointer_type [Llvm] | qualified_pointer_type ty as returns the pointer type referencing objects
of type ty in address space as.
|
R | |
| remove_block [Llvm] | remove_block bb removes the basic block bb from its parent function.
|
| remove_function_attr [Llvm] | remove_function_attr f a removes attribute a from the return type of
function f.
|
| remove_initializer [Llvm] | remove_initializer gv unsets the initializer for the global variable
gv.
|
| remove_instruction_param_attr [Llvm] | remove_instruction_param_attr ci i a removes attribute a from the
ith parameter of the call or invoke instruction ci.
|
| remove_module [Llvm_executionengine] | remove_module m ee removes the module m from the execution engine
ee.
|
| remove_param_attr [Llvm] | remove_param_attr p a removes attribute a from parameter p.
|
| replace_all_uses_with [Llvm] | replace_all_uses_with old new replaces all uses of the value old
with the value new.
|
| reset_fatal_error_handler [Llvm] | reset_fatal_error_handler () resets LLVM's fatal error handler.
|
| return_type [Llvm] | return_type fty gets the return type of the function type fty.
|
| rev_iter_blocks [Llvm] | rev_iter_blocks f fn applies function f to each of the basic blocks
of function fn in reverse order.
|
| rev_iter_functions [Llvm] | rev_iter_functions f fn applies function f to each of the functions of
module m in reverse order.
|
| rev_iter_globals [Llvm] | rev_iter_globals f m applies function f to each of the global variables
of module m in reverse order.
|
| rev_iter_params [Llvm] | rev_iter_params f fn applies function f to each of the parameters
of function fn in reverse order.
|
| run_function [Llvm.PassManager] | run_function f fpm executes all of the function passes scheduled in the
function pass manager fpm over the function f.
|
| run_module [Llvm.PassManager] | run_module m pm initializes, executes on the module m, and finalizes
all of the passes scheduled in the pass manager pm.
|
| run_static_ctors [Llvm_executionengine] | run_static_ctors ee executes the static constructors of each module in
the execution engine ee.
|
| run_static_dtors [Llvm_executionengine] | run_static_dtors ee executes the static destructors of each module in
the execution engine ee.
|
S | |
| section [Llvm] | section g returns the linker section of the global value g.
|
| set_alignment [Llvm] | set_alignment n g sets the required alignment of the global value g to
n bytes.
|
| set_cleanup [Llvm] | set_cleanup lp sets the cleanup flag in the landingpadinstruction.
|
| set_condition [Llvm] | set_condition v c sets the condition of the branch instruction v to the value c.
|
| set_current_debug_location [Llvm] | set_current_debug_location b md sets the current debug location md in
the builder b.
|
| set_data_layout [Llvm] | set_data_layout s m changes the data layout specifier for the module m
to the string s.
|
| set_disable_unit_at_a_time [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::DisableUnitAtATime function.
|
| set_disable_unroll_loops [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::DisableUnrollLoops function.
|
| set_dll_storage_class [Llvm] | set_dll_storage_class v g sets the DLL storage class of the global value g to
v.
|
| set_externally_initialized [Llvm] | set_externally_initialized c gv sets the global variable gv to be
externally initialized if c is true and not otherwise.
|
| set_function_call_conv [Llvm] | set_function_call_conv cc f sets the calling convention of the function
f to the calling convention numbered cc.
|
| set_gc [Llvm] | set_gc gc f sets the collection algorithm for the function f to
gc.
|
| set_global_constant [Llvm] | set_global_constant c gv sets the global variable gv to be a constant if
c is true and not if c is false.
|
| set_initializer [Llvm] | set_initializer c gv sets the initializer for the global variable
gv to the constant c.
|
| set_inst_debug_location [Llvm] | set_inst_debug_location b i sets the current debug location of the builder
b to the instruction i.
|
| set_instruction_call_conv [Llvm] | set_instruction_call_conv cc ci sets the calling convention for the call
or invoke instruction ci to the integer cc, which can be one of the
values from the module Llvm.CallConv.
|
| set_linkage [Llvm] | set_linkage l g sets the linkage of the global value g to l.
|
| set_metadata [Llvm] | set_metadata i kind md sets the metadata md of kind kind in the
instruction i.
|
| set_module_inline_asm [Llvm] | set_module_inline_asm m asm sets the inline assembler for the module.
|
| set_operand [Llvm] | set_operand v i o sets the operand of the value v at the index i to
the value o.
|
| set_opt_level [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::OptLevel function.
|
| set_param_alignment [Llvm] | set_param_alignment p a set the alignment of parameter p to a.
|
| set_section [Llvm] | set_section s g sets the linker section of the global value g to s.
|
| set_size_level [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::SizeLevel function.
|
| set_successor [Llvm] | set_successor v i o sets the successor of the value v at the index i to
the value o.
|
| set_tail_call [Llvm] | set_tail_call tc ci flags the call instruction ci as eligible for tail
call optimization if tc is true, clears otherwise.
|
| set_target_triple [Llvm] | target_triple triple m changes the target specifier for the module m to
the string triple.
|
| set_thread_local [Llvm] | set_thread_local c gv sets the global variable gv to be thread local if
c is true and not otherwise.
|
| set_thread_local_mode [Llvm] | set_thread_local c gv sets the thread local mode of the global
variable gv.
|
| set_value_name [Llvm] | set_value_name n v sets the name of the value v to n.
|
| set_verbose_asm [Llvm_target.TargetMachine] |
Sets the assembly verbosity of this target machine.
|
| set_visibility [Llvm] | set_visibility v g sets the linker visibility of the global value g to
v.
|
| set_volatile [Llvm] | set_volatile v i marks the load or store instruction i as volatile
if v is true, unmarks otherwise.
|
| size_in_bits [Llvm_target.DataLayout] |
Computes the size of a type in bits for a target.
|
| size_of [Llvm] | size_of ty returns the sizeof constant for the type ty.
|
| stack_align [Llvm_target.DataLayout] |
Computes the call frame alignment of a type in bytes for a target.
|
| store_size [Llvm_target.DataLayout] |
Computes the storage size of a type in bytes for a target.
|
| string_of_const [Llvm] | string_of_const c returns Some str if c is a string constant,
or None if this is not a string constant.
|
| string_of_llmodule [Llvm] | string_of_llmodule m returns the .ll representation of the module m
as a string.
|
| string_of_lltype [Llvm] | string_of_lltype ty returns a string describing the type ty.
|
| string_of_llvalue [Llvm] | string_of_llvalue v returns a string describing the value v.
|
| struct_element_types [Llvm] | struct_element_types sty returns the constituent types of the struct type
sty.
|
| struct_name [Llvm] | struct_name ty returns the name of the named structure type ty,
or None if the structure type is not named
|
| struct_set_body [Llvm] | struct_set_body ty elts ispacked sets the body of the named struct ty
to the elts elements.
|
| struct_type [Llvm] | struct_type context tys returns the structure type in the context
context containing in the types in the array tys.
|
| succ [Llvm_target.Target] | succ t returns the next target after t, or None
if t was the last target.
|
| successor [Llvm] | successor v i returns the successor at index i for the value v.
|
| successors [Llvm] | successors v returns the successors of v.
|
| switch_default_dest [Llvm] | switch_default_dest sw returns the default destination of the switch
instruction.
|
T | |
| target [Llvm_target.TargetMachine] |
Returns the Target used in a TargetMachine
|
| target_triple [Llvm] | target_triple m is the target specifier for the module m, something like
i686-apple-darwin8.
|
| thread_local_mode [Llvm] | is_thread_local gv returns the thread local mode of the global
variable gv.
|
| triple [Llvm_target.TargetMachine] |
Returns the triple used while creating this target machine.
|
| type_by_name [Llvm] | type_by_name m name returns the specified type from the current module
if it exists.
|
| type_context [Llvm] | |
| type_is_sized [Llvm] | type_is_sized ty returns whether the type has a size or not.
|
| type_of [Llvm] | type_of v returns the type of the value v.
|
U | |
| undef [Llvm] | undef ty returns the undefined value of the type ty.
|
| use_begin [Llvm] | use_begin v returns the first position in the use list for the value v.
|
| use_inliner_with_threshold [Llvm_passmgr_builder] |
See the
llvm::PassManagerBuilder::Inliner function.
|
| use_succ [Llvm] | use_succ u returns the use list position succeeding u.
|
| used_value [Llvm] | used_value u returns the usee of the use u.
|
| user [Llvm] | user u returns the user of the use u.
|
V | |
| value_is_block [Llvm] | value_is_block v returns true if the value v is a basic block and
false otherwise.
|
| value_name [Llvm] | value_name v returns the name of the value v.
|
| value_of_block [Llvm] | value_of_block bb losslessly casts bb to an llvalue.
|
| var_arg_function_type [Llvm] | var_arg_function_type ret_ty param_tys is just like
function_type ret_ty param_tys except that it returns the function type
which also takes a variable number of arguments.
|
| vector_size [Llvm] | element_type ty returns the element count of the vector type ty.
|
| vector_type [Llvm] | vector_type ty n returns the array type containing n elements of the
primitive type ty.
|
| verify_function [Llvm_analysis] | verify_function f returns None if the function f is valid, and
Some reason if it is invalid.
|
| verify_module [Llvm_analysis] | verify_module m returns None if the module m is valid, and
Some reason if it is invalid.
|
| view_function_cfg [Llvm_analysis] | view_function_cfg f opens up a ghostscript window displaying the CFG of
the current function with the code for each basic block inside.
|
| view_function_cfg_only [Llvm_analysis] | view_function_cfg_only f works just like view_function_cfg, but does not
include the contents of basic blocks into the nodes.
|
| visibility [Llvm] | visibility g returns the linker visibility of the global value g.
|
| void_type [Llvm] | void_type c creates a type of a function which does not return any
value in the context c.
|
W | |
| write_bitcode_file [Llvm_bitwriter] | write_bitcode_file m path writes the bitcode for module m to the file at
path.
|
| write_bitcode_to_fd [Llvm_bitwriter] | write_bitcode_to_fd ~unbuffered fd m writes the bitcode for module
m to the channel c.
|
| write_bitcode_to_memory_buffer [Llvm_bitwriter] | write_bitcode_to_memory_buffer m returns a memory buffer containing
the bitcode for module m.
|
X | |
| x86_fastcall [Llvm.CallConv] | x86_fastcall is the familiar fastcall calling
convention from C.
|
| x86_mmx_type [Llvm] | x86_mmx_type c returns the x86 64-bit MMX register type in the
context c.
|
| x86_stdcall [Llvm.CallConv] | x86_stdcall is the familiar stdcall calling
convention from C.
|
| x86fp80_type [Llvm] | x86fp80_type c returns the x87 80-bit floating point type in the context
c.
|